TacTic unloaders consist of a series of arms raised by pneumatic or hydraulic cylinders. These arms are used to raise an inspected piece from the output idler section and roll it onto Model 150 Output Storage Rails or a Model 190 Series Sorting Rack. The piece weight ratings in lbs/ft for the various unloader models are: Model 187; Model 188 lb/ft; and Model 188L (Hydraulic); 40, 55, and 100 lbs/ft (60, 80 and 150 kg/m respectively).
You may also like
For use with Magnetic Analysis Test Systems
Prevent False Test Signals from Contaminated Bar & Tube Surfaces & Reduce Rotary Cleaning Downtime.
Model 204 and 205 Series Air-actuated “Extended” Drive Units are overhead drive wheels.
Material is placed on forward-sloping, plastic-covered storage arms of the loader and is restrained from rolling off by means of adjustable stops at the front of the loader modules.
These sorters are available for manual or automatic operation. After material is inspected, it is unloaded and ready for sorting.
Model 150 Series Storage Rails are available for use adjacent to output Idler sections.
These rugged conveyor sections are placed at each end of a tester to provide good support for incoming and outgoing pieces.
Model 76E “Standard Duty” Testers feature tanks with an inside length from 6″ to 30″ (150-760 mm).
“Heavy Duty” Testers are powered either by a 7.5 HP motor (76F) or by a 10 HP motor (76G).
Ultrasonic Inspection Systems for Flat-Sided Material Squares, Rectangles, Hexagonals, Strip
These testers use pneumatically raised transducer coupling shoes in one or more dual probe carriers that contact rotating material from underneath.
These testers are designed to handle material sizes ranging from 2 1/2 to 7 inches (63-178 mm).