This series of racks have one “accept” bin and either one “reject” bin (191 Series) or two “reject” bins (192 Series). They are available for piece weights up to 11 lbs/ft (191/192); 55 lbs/ft (191H/192H) and 100 lbs/ft (191K/192K) corresponding to 16, 80 and 150 kg/m. See Bulletin 1000.
There are two ways to divert unloaded material into accept or reject bins: by manual push-button operation or automatically through the use of a Model 1088 Marker/Sorter Controller. See Bulletin 1000.
Also available is the 191B Belt-Fed Sorter for flat sided materials. When a piece is rejected, “gates” rise and the piece is routed to the reject bin. Good pieces are conveyed over the gates on motorized belts which carry the piece to the accept bin
You may also like
For use with Magnetic Analysis Test Systems
Prevent False Test Signals from Contaminated Bar & Tube Surfaces & Reduce Rotary Cleaning Downtime.
Model 204 and 205 Series Air-actuated “Extended” Drive Units are overhead drive wheels.
Material is placed on forward-sloping, plastic-covered storage arms of the loader and is restrained from rolling off by means of adjustable stops at the front of the loader modules.
Model 150 Series Storage Rails are available for use adjacent to output Idler sections.
Models 187 and 188 Unloaders unload each piece after it has passed through the Tester to the output Idler Sections.
These rugged conveyor sections are placed at each end of a tester to provide good support for incoming and outgoing pieces.
Model 76E “Standard Duty” Testers feature tanks with an inside length from 6″ to 30″ (150-760 mm).
“Heavy Duty” Testers are powered either by a 7.5 HP motor (76F) or by a 10 HP motor (76G).
Ultrasonic Inspection Systems for Flat-Sided Material Squares, Rectangles, Hexagonals, Strip
These testers use pneumatically raised transducer coupling shoes in one or more dual probe carriers that contact rotating material from underneath.
These testers are designed to handle material sizes ranging from 2 1/2 to 7 inches (63-178 mm).